February 8, —KB (OS Builds , , and ) – Microsoft Support

I’m not sure why it gave you S version unless it’s bundled in now instead of Home. Watch for a boot menu as you install. I hope this helps. Feel free to ask back any questions and let us know how it goes. I will keep working with you until it’s resolved. Windows MVP ret. Now an Independent Advisor. Millions helped via my tutorials and personally in forums for 12 years. I do not quit for those who are polite and cooperative. Details required : characters remaining Cancel Submit.

Was this reply helpful? Yes No. Sorry this didn’t help. Thanks for your feedback. The PC was a new build with a clean install of Windows 7 Pro. Since then I have migrated to Windows 10 just before the free upgrade expired, a then upgraded to the feature releases at least three iterations; , , currently It was always Windows 10 Pro. I will give your suggestion a try and check the Get-WimInfo result. Ill let you know if I see anything different.

I think I found the answer. I should have queried all the indexes with the Get-WimInfo tool. OS Builds After May 10, , these devices will no longer receive monthly security and quality updates that contain protection from the latest security threats.

To continue receiving security and quality updates, Microsoft recommends updating to the latest version of Windows 10 or Windows To continue receiving security and quality updates, Microsoft recommends that you update to the latest version of Windows Using the EKB makes updating faster and easier and requires a single restart.

For information about Windows update terminology, see the article about the types of Windows updates and the monthly quality update types.

For an overview of Windows 10, version 20H2, see its update history page. Note Follow WindowsUpdate to find out when new content is published to the Windows release health dashboard. Note To view the list of addressed issues, click or tap the OS name to expand the collapsible section. This security update includes improvements that were a part of update KB released March 22, and also addresses the following issues:. For more information, see CVE If you installed earlier updates, only the new updates contained in this package will be downloaded and installed on your device.

For more information about security vulnerabilities, please refer to the new Security Update Guide website and the April Security Updates. This update makes quality improvements to the servicing stack, which is the component that installs Windows updates.

Servicing stack updates SSU ensure that you have a robust and reliable servicing stack so that your devices can receive and install Microsoft updates. Devices with Windows installations created from custom offline media or custom ISO image might have Microsoft Edge Legacy removed by this update, but not automatically replaced by the new Microsoft Edge.

This issue is only encountered when custom offline media or ISO images are created by slipstreaming this update into the image without having first installed the standalone servicing stack update SSU released March 29, or later. Note Devices that connect directly to Windows Update to receive updates are not affected. This includes devices using Windows Update for Business. Use the following steps to extract the SSU:.

Extract the cab from the msu via this command line using the package for KB as an example : expand Windows Extract the SSU from the previously extracted cab via this command line: expand Windows Slipstream this file into your offline image first, then the LCU. If you have already encountered this issue by installing the OS using affected custom media, you can mitigate it by directly installing the new Microsoft Edge. If you need to broadly deploy the new Microsoft Edge for business, see Download and deploy Microsoft Edge for business.

After installing the June 21, KB update, some devices cannot install new updates, such as the July 6, KB or later updates. To target Windows 8. For links to older kits, see Other WDK downloads. Starting with this release, WDF redistributable co-installers are no longer supported.

Please use the SDK download link in step 2 below. WDK has Spectre mitigation enabled by default but requires Spectre mitigated libraries to be installed with Visual Studio for each architecture you are developing for.

To locate these items, you will need to know the latest version of MSVC installed on your system. With this information Latest , go to Individual components and search for Latest.

This will return the tool sets for all architectures, including Spectre mitigated libs. Select the driver architecture you are developing for.

Download Windows 10 Disc Image (ISO File).Have I got the correct Windows 10 ISO file? – Microsoft Community

This event is also used to count WMR device and device type. This event captures basic checksum data about the device inventory items stored in the cache for use in validating data completeness for Microsoft. Core events. The fields in this event may change over time, but they will always represent a count of a given object. This event sends inventory component versions for the Device Inventory data. This event enumerates the signatures of files, either driver packages or application executables.

For driver packages, this data is collected on demand via Telecommand to limit it only to unrecognized driver packages, saving time for the client and space on the server. For applications, this data is collected for up to 10 random executables on a system. This event sends basic metadata about an application on the system. The data collected with this event is used to keep Windows performing properly and up to date.

This event represents what drivers an application installs. This event provides file-level information about the applications that exist on the system. This event is used to understand the applications on a device to determine if those applications will experience compatibility issues when upgrading Windows. This event provides the basic metadata about the frameworks an application may depend on.

This event indicates that a new set of InventoryApplicationFrameworkAdd events will be sent. This event indicates that a new set of InventoryDevicePnpAdd events will be sent. This event indicates that a new set of InventoryApplicationAdd events will be sent. This event sends basic metadata about a device container such as a monitor or printer as opposed to a Plug and Play device. The data collected with this event is used to help keep Windows up to date and to keep Windows performing properly.

This event indicates that the InventoryDeviceContainer object is no longer present. This event indicates that a new set of InventoryDeviceContainerAdd events will be sent. This event retrieves information about what sensor interfaces are available on the device.

This event indicates that a new set of InventoryDeviceInterfaceAdd events will be sent. This event sends additional metadata about a Plug and Play device that is specific to a particular class of devices.

The data collected with this event is used to help keep Windows up to date and performing properly while reducing overall size of data payload. This event indicates that the InventoryDeviceMediaClass object represented by the objectInstanceId is no longer present. This event is used to understand a PNP device that is specific to a particular class of devices.

This event sends basic metadata about a PNP device and its associated driver to help keep Windows up to date. This information is used to assess if the PNP device and driver will remain compatible when upgrading Windows. This event indicates that the InventoryDevicePnpRemove object is no longer present.

This event sends basic metadata about sensor devices on a machine. This event indicates that a new set of InventoryDeviceSensor events will be sent. This event sends basic metadata about the USB hubs on the device. This event sends basic metadata about driver binaries running on the system. This event indicates that the InventoryDriverBinary object is no longer present. This event indicates that a new set of InventoryDriverBinaryAdd events will be sent.

This event sends basic metadata about drive packages installed on the system. This event indicates that the InventoryDriverPackageRemove object is no longer present. This event indicates that a new set of InventoryDriverPackageAdd events will be sent. This event collects traces of all other Core events, not used in typical customer scenarios. This event signals the beginning of the event download, and that tracing should begin.

This event signals the end of the event download, and that tracing should end. This event sends details collected for a specific application on the source device. This event indicates the beginning of a series of AppHealthStaticAdd events. This event indicates that this particular data object represented by the objectInstanceId is no longer present.

This is a diagnostic event that indicates a new sync is being generated for this object type. This event represents the basic metadata about the OS indicators installed on the system. The data collected with this event helps ensure the device is up to date and keeps Windows performing properly. This event is used to understand the OS indicators installed on the system. The data collected with this event helps ensure the device is current and Windows is up to date and performing properly.

This event indicates the number of bytes read from or read by the OS and written to or written by the OS upon system startup. This event includes basic data about the Operating System, collected during Boot and used to evaluate the success of the upgrade process.

This critical device configuration event provides information about drivers for a driver installation that took place within the kernel. This event is sent when a problem code is cleared from a device. This event is sent when a new problem code is assigned to a device.

This event sends Product and Service Performance data on which area of the device exceeded safe temperature limits and caused the device to shutdown. This information is used to ensure devices are behaving as they are expected to. This config event sends basic device connectivity and configuration information from Microsoft Edge about the current data collection consent, app version, and installation state to keep Microsoft Edge up to date and secure. This Ping event sends a detailed inventory of software and hardware information about the EdgeUpdate service, Edge applications, and the current system environment including app configuration, update configuration, and hardware capabilities.

One or more events is sent each time any installation, update, or uninstallation occurs with the EdgeUpdate service or with Edge applications. This event is used to measure the reliability and performance of the EdgeUpdate service and if Edge applications are up to date. This is an indication that the event is designed to keep Windows secure and up to date.

This event sends simple Product and Service Performance data on a crashing Microsoft Edge browser process to help mitigate future instances of the crash. This event sends hardware and software inventory information about the Microsoft Edge Update service, Microsoft Edge applications, and the current system environment, including app configuration, update configuration, and hardware capabilities.

It’s used to measure the reliability and performance of the EdgeUpdate service and if Microsoft Edge applications are up to date. This event returns data to track the count of the migration objects across various phases during feature update. The data collected with this event is used to help keep Windows secure and to track data loss scenarios. This event returns data about the count of the migration objects across various phases during feature update.

This event sends data at the end of a Miracast session that helps determine RTSP related Miracast failures along with some statistics about the session.

The data collected with this event is used to keep Windows product and service performing properly. This event indicates Windows Mixed Reality device state. This is an internal-only test event used to validate the utc. The provider of this event is assigned to the Windows Core Telemetry group provider in order to test.

This event is used to determine whether the user successfully completed the privacy consent experience. This event provides the effectiveness of new privacy experience. This event is sent when detailed state information is needed from an update trial run. The event indicates progress made by the updater.

This information assists in keeping Windows up to date. This event sends basic metadata about the SetupPlatform update installation process, to help keep Windows up to date.

This event sends basic metadata about the update installation process generated by SetupPlatform to help keep Windows up to date. This service retrieves events generated by SetupPlatform, the engine that drives the various deployment scenarios, to help keep Windows up to date. This event is sent when targeting logic is evaluated to determine if a device is eligible for a given action. This event sends tracking data about the software distribution client check for content that is applicable to a device, to help keep Windows up to date.

This event sends data on whether the Update Service has been called to execute an upgrade, to help keep Windows up to date. This event sends tracking data about the software distribution client download of the content for that update, to help keep Windows up to date.

This event allows tracking of ongoing downloads and contains data to explain the current state of the download. This event sends tracking data about the software distribution client installation of the content for that update, to help keep Windows up to date. This is a revert event for target update on Windows Update Client.

This is a start event for Server Initiated Healing client. This is an uninstall event for target update on Windows Update Client. This event helps to identify whether update content has been tampered with and protects against man-in-the-middle attack.

This event includes the hardware level data about battery performance. The data collected with this event is used to help keep Windows products and services performing properly. This event collects information to keep track of health indicator of the built-in micro controller. For example, the number of abnormal shutdowns due to power issues during boot sequence, type of display panel attached to base, thermal indicator, throttling data in hardware etc. The data collected with this event is used to help keep Windows secure and performing properly.

This event indicates the customer has cancelled uninstallation of Windows. The data collected with this event is used to keep Windows performing properly and helps with tracking the health of recovery and OSUninstall scenarios. This event sends an error code when the Windows uninstallation fails. This event is sent to signal an upcoming reboot during uninstallation of Windows. This event indicates that the Windows uninstallation has started. This event sends diagnostic data when the Windows uninstallation is not available.

This event is sent when users have actions that will block the uninstall of the latest quality update. This event is sent when the registry indicates that the latest cumulative Windows update package has finished uninstalling. This event is sent when the latest cumulative Windows update was uninstalled on a device. This event is sent when a push-button reset operation is blocked by the System Administrator. This event signals a failed handoff between two recovery binaries. This event signals successful handoff between two recovery binaries.

This event reports the error code when recovery fails. This event provides information about whether a system reset needs repair. This event sends basic data during boot about the firmware loaded or recently installed on the machine. This event sends basic info on whether the device should be updated to the latest cumulative update. The data collected with this event is used to help keep Windows up to date and secure.

This event sends basic info on whether the device is ready to download the latest cumulative update. This event sends basic info when download of the latest cumulative update begins. This event sends basic info on the result of the installation of the latest cumulative update. Event that tracks the effectiveness of an operation to mitigate an issue on devices that meet certain requirements.

This event provides the result of running the compatibility check for update assistant. This event provides basic information about the device where update assistant was run. This event provides details about user action.

This event indicates that an update detection has occurred and the targeted install has been blocked. This event indicates that the update has been completed. This event indicates that the detection phase of USO has started.

This event indicates that the download phase of USO has started. This event indicates that the install phase of USO has started. This event indicates that the device is already on the expected UBR.

This event indicates the expected UBR of the device. This event indicates that the expedite update is completed with reboot. This event indicates that the device has finished servicing and a reboot is required. This event sends results of the expedite USO scan. This event indicates that the unified installer has completed.

This event indicates that the installation has started for the unified installer. This event is sent when a blob notification is received. This event is sent when a notification is received. This issue is only encountered when custom offline media or ISO images are created by slipstreaming this update into the image without having first installed the standalone servicing stack update SSU released March 29, or later.

Note Devices that connect directly to Windows Update to receive updates are not affected. This includes devices using Windows Update for Business. Use the following steps to extract the SSU:. Extract the cab from the msu via this command line using the package for KB as an example : expand Windows Extract the SSU from the previously extracted cab via this command line: expand Windows Slipstream this file into your offline image first, then the LCU.

If you have already encountered this issue by installing the OS using affected custom media, you can mitigate it by directly installing the new Microsoft Edge. If you need to broadly deploy the new Microsoft Edge for business, see Download and deploy Microsoft Edge for business.

After installing the June 21, KB update, some devices cannot install new updates, such as the July 6, KB or later updates. For more information and a workaround, see KB Recovery discs that were created by using the Backup and Restore Windows 7 app on devices which have installed Windows updates released before January 11, are not affected by this issue and should start as expected.

Note No third-party backup or recovery apps are currently known to be affected by this issue. This issue is addressed in KB This issue occurs after installing KB February 8, and later updates. Microsoft now combines the latest servicing stack update SSU for your operating system with the latest cumulative update LCU. This update will be downloaded and installed automatically from Windows Update in accordance with configured policies.

To get the standalone package for this update, go to the Microsoft Update Catalog website. Running Windows Update Standalone Installer wusa. You cannot remove the SSU from the system after installation.

Addresses an issue that prevents Azure Desired State Configuration DSC scenarios that have multiple partial configurations from working as expected. Addresses an issue that occurs when adding a trusted user, group, or computer that has a one-way trust in place. Addresses an issue that fails to display the Application Counters section in the performance reports of the Performance Monitor tool.

Addresses a memory leak issue that affects Windows systems that are in use 24 hours each day of the week. Addresses an issue that causes print failures when a low integrity level LowIL application prints to a null port.

Addresses an issue that prevents BitLocker from encrypting when you use the silent encryption option. Addresses an issue that occurs when you apply multiple WDAC policies. Doing that might prevent scripts from running when the policies allow scripts to run.

This issue occurs when you turn on a virtual graphics processing unit GPU. Addresses an issue that might cause the Remote Desktop client application to stop working when you end a session. Addresses a reliability issue in the Terminal Services Gateway TS Gateway service that randomly causes clients to disconnect. Deploys search highlights to devices that are domain-joined.

For more information about the feature, see Group configuration: search highlights in Windows. You can configure search highlights at the enterprise scale using Group Policy settings defined in the Search.

For more information, see Block untrusted fonts in an enterprise. Addresses an issue that causes a yellow exclamation point to display in Device Manager. As a result, this depletes all the physical memory on the machine, which causes the server to stop responding. Addresses an issue that causes file copying to be slower because of a wrong calculation of write buffers within cache manager. Addresses an issue that might cause a system to stop responding when a user signs out if Microsoft OneDrive is in use.

This issue occurs after installing Windows updates released January 11, or later. If you installed earlier updates, only the new updates contained in this package will be downloaded and installed on your device. This update makes quality improvements to the servicing stack, which is the component that installs Windows updates. Servicing stack updates SSU ensure that you have a robust and reliable servicing stack so that your devices can receive and install Microsoft updates.

Devices with Windows installations created from custom offline media or custom ISO image might have Microsoft Edge Legacy removed by this update, but not automatically replaced by the new Microsoft Edge. This issue is only encountered when custom offline media or ISO images are created by slipstreaming this update into the image without having first installed the standalone servicing stack update SSU released March 29, or later.

Please note that it might take up to 24 hours for the resolution to propagate automatically to consumer devices and non-managed business devices. Restarting your Windows device might help the resolution apply to your device faster.

For enterprise-managed devices that have installed an affected update and encountered this issue, you can resolve this by installing and configuring a special Group Policy preferred. Important Verify that you are using the correct Group Policy for your version of Windows.

This issue might be encountered when attempting a manual reset initiated within Windows or a remote reset. This issue was addressed in KB Some devices might take up to seven 7 days after the installation of KB to fully address the issue and prevent files from persisting after a reset. For immediate effect, you can manually trigger Windows Update Troubleshooter using the instructions in Windows Update Troubleshooter.

If you are part of an organization that manages devices or prepared OS images for deployment, you can also address this issue by applying a compatibility update for installing and recovering Windows. Important If devices have already been reset and OneDrive files have persisted, you must use a workaround above or perform another reset after applying one of the workarounds above. Recovery discs that were created by using the Backup and Restore Windows 7 app on devices which have installed Windows updates released before January 11, are not affected by this issue and should start as expected.

Note No third-party backup or recovery apps are currently known to be affected by this issue. This issue is addressed in KB Microsoft now combines the latest servicing stack update SSU for your operating system with the latest cumulative update LCU. This update will be downloaded and installed automatically from Windows Update in accordance with configured policies.

To get the standalone package for this update, go to the Microsoft Update Catalog website. Running Windows Update Standalone Installer wusa. You cannot remove the SSU from the system after installation. For a list of the files that are provided in this update, download the file information for cumulative update For a list of the files that are provided in the servicing stack update, download the file information for the SSU – version Related topics.

Windows 10, version 22H2 update history.